It has Constellation analyzer and Spectrum analyzer and also support the MPEG-4. You can use it to receive DVB-S and DVB-S2 signal, Watch HD programing. It's very convenient for the installer to catch and alignment the antenna to the best position. It uses microprocessor controller and has the reliable and stable performance. When you turn on it, the channel picture, signal strength and signal quality will be showed on 4.3 inch Large LCD screen. The large menu also can display EL/AZ, CBER/VBER, S/N. It can detect very weak signal and provide antenna power(OFF/13V/18V)and also has the auto–protection for LNB short–circuit. In one word, it is your wise choose to use this HD satellite finder meter.


* 16:9 color TFT LCD Display with 4.3 " Large Screen
* It is excellent for justage Satellite Dishes
* Backlit keyboard (burn time 5,10,20 seconds or turn off)
* An easy Satfinder for DVB-S + S2 with HD TV-Picture
* The Key Button has backlight, also with flashlight function.
* Built-in speaker
* Angle calculation of azimuth, elevation and LNB tilt
* Spectrum-Analyzer
* Constellation-diagram
* Display the signal strength in percent and as a bar
* Display of BER
* Display of C / N
* Display of signal level in dBμV
* Unicable SCR measurement
* DiSEqC 1.0 for DiSEqC switches or for multi-switches
* DiSEqC 1.1 for control of 1-8 LNB
* DiSEqC 1.2 motor control
* Automatic Channel Search TV and radio
* Reception and playback of DVB-S + S2 TV programs
* Reception and playback of DVB-S + S2 radio programs
* EPG (electronic program guide)
* Format conversion 4:3 or 16:9
* Data transfer via USB memory stick:
   Firmware Updates
   Backup your own settings
   Restore the custom settings
   ave Satellite-lists to edit on a PC
   Satellite lists again transferred to the device
   For viewing photos and playing MP3 files from USB memory stick
* AV-Output: Using the adapter cable can be connected to the device to the TV and used as normal receiver
* AV-Input: can connect with a external devices such as TV-Camera to use the Meter as a Monitor
* WS6932 uses the 12V power adapter. It includes 8.4V3000mAH high capacity LI-ION battery which can work for
more than 2 hours when it is fully charged.
* Unicable SCR measurement:
SCR 1-8, with 12 pre-stored frequencies:
1210, 1284, 1400, 1420, 1516, 1632, 1680, 1748, 1864, 1980, 2040, 2096 MHz
* Multimedia Player:
Display of photos stored in JPG format and play MP3 files from your own USB drive!
* PC Software TOOL:
With the PC "software tool" you can edit the transponder / satellite list. Such as: Satellite & Add Remove, Transponder Add/Remove. The final lists will be using a USB - memory stick to transfer to the meter.


DVB-S/DVB-S2 Fully Compliant
Connector F Type 
Input Frequency  950 to 2150 MHz 
Signal Input Level  65 to 25 dBm 
LNB Power Supply  13V/18V, Imax 350mA 
LNB Switching Control  DiSEqC1.0/1.1/1.2/USALS
Demodulation and Decoding(DVB-S)  Symbol rate up to QPSK 45MSps 
Demodulation and Decoding(DVB-S2)  Symbol rate up to: 45Msps for QPSK and 8PSK; 36Msps for 16APSK and 28Msps for 32APSK
Processor 180MHz MIPS
Flash 8Mbyte
Memory 16x16Mbit DDR
Signal Level 0 to -96dBm
Step 1MHz/2MHz/4MHz
Video Compression Support Multifunctional
Video Formats 4:3/16:9
Audio Compression MP3
Audio Mode Dual(R/L), Stereo
Frequency 32KHz, 44.1KHz, 48KHz, 16KHz, 22.05KHz, 34KHz
1xUSB2.0 Host Update/Dump of Firmware/MP3/MP4
Power 0.5W
Li-ion Battery  8.4V/3000mAh
Adapter  OUTPUT :DC12V/1.5A, INPUT :100240VAC 50/60Hz
Power consumption  Max. 10W 
Size (W x D x H)  125x205x45(mm) 
Net Weight  0.66kg 

Note: Specifications are subject to changes without notice.


Copyright (c) Finder Electronics All Rights Reserved.